Old, single pane windows waste energy, require lots of maintenance, and are often difficult to operate. New, vinyl replacement windows, on the other hand, are usually energy efficient and operate smoothly without much maintenance. You should do yourself a favor and replace your inefficient windows with new ones.
Installing replacement windows isn’t an easy task. It requires a fair amount of carpentry skills and home-remodeling experience. It also helps if your window is on the ground floor and is accessible from the outside as well. Gather the listed materials and follow the tips below to learn more about house window replacement.
Suggested Materials
Measuring Tape
Hammer
Drill/Driver
Screwdriver
Utility Knife
Pry Bar
Chisel
Replacement Window
Caulking Gun
Caulk
Shims
Tips
Measure for the New Window
It is important to have accurate measurements for the windows in your home. Good measurements will ensure that your windows fit properly for maximum energy savings as well as allow for easy installation. Remember, good insulation is as important as installation, so use an appropriate amount of caulk on the outside of the window.
Remove the Old Window Sashes
The replacement windows should fit inside the existing window frame, so you only need to remove the sashes, parting bead and inside stop from the existing window. If you want to make this easier and safer, install the new windows from the inside of your home.
Install the New Window
Don’t do a sloppy job when installing your new windows because poorly installed or adjusted windows waste energy and are harder to operate. It’s best to take your time installing new windows without taking any shortcuts.
If you are interested in installing new windows but are unable to do so yourself, you should use TalkLocal to get in contact with local window installers who will get the job done quickly and professionally.
