If you have an older toilet and you are experiencing an unusually slow refill time, it might be a result of an old toilet water supply house. Over time, these hoses can become clogged or kinked, restricting the water flow into the toilet tank. Read this article to learn more on how to increase toilet water flow.
In order to fix this problem and increase the flow of toilet water, you must replace the toilet water supply hose. To do so, pick up a new hose, an adjustable wrench, and a pair of slip joint pliers at your local hardware store. Twist the knob where the hose connects to shut off the water supply and unscrew the valve from that end. Finish detaching the hose from the other end by unscrewing it where it attaches to the bottom of the toilet tank. You might need to use pliers for this part if it’s tightly screwed in.
Next, use Teflon tape to wrap around each end where the hose is inserted. This helps to seal the connection after the new hose is installed. When you’re ready to reconnect, take the large end of the new hose and connect it to the end of the flush valve. Then, take the other end and attach it to the shut off valve. Use your wrench to make sure the fitting is tightened all the way.
When you’ve finished, you can turn the water supply back on by turning the valve all the way counterclockwise. This will ensure that the hose allows the highest volume of water to flow back into the tank.
If these directions seem a little too complicated or this didn’t fix your problem, you should call a local plumber to check it out for you. Try using www.TalkLocal.com to help you book a highly rated plumber in your area within minutes.
