Learning how to install RV awning can help you save time, heartache and money. Even those who are not mechanically inclined in the slightest can easily accomplish this task. And, much like home awnings, these will help you steer clear of the elements when camping or living in your RV.
You will only need a few tools and a little patience to get the job done. You will need a screwdriver, the type of which will vary. Keep both by your side just in case. You will also need a tape measure.
1. Purchase supplies: You will need to purchase an RV awning that specifically fits your RV. Be sure to take proper measurements to ensure that you purchase the right awning.
2. The installation process: The first step in installing an RV awning is to screw the railing of the awning to the top of your RV with the screws that came with your awning purchase. Secure the railing, but do not screw them in too tight or you could run into trouble later. Unroll the awning and place the tension arm. Unfold the support legs to place on the floor. Attach the bottom brackets.
3. Protect your awning: Natural elements can take a serious toll on your awning. You can easily protect your awning by not letting it flap in the wind. You can purchase a de-flapper at any RV supply store. Tie-down ends and stakes can also help secure your awning so that it is not damaged by the wind.
Get A Professional To Do It
If you do not want to take the time or effort to complete this task by your lonesome, count on an expert roofer. TalkLocal provides customers information about businesses that cater to them in the local area. All you have to do is fill out some brief information on our website and you will have highly-qualified professionals calling YOU in minutes!
