Saving money on energy through solar panels is becoming more popular than ever these days, but it isn’t exactly common sense to install them. There is a lot more to the process than more traditional projects, like re-shingling your roof.
If you need to save money and want to help the environment, solar panels are perfect for you, and our solar panels installation guide can help get you started. Although you may need professional help in some cases, these steps will almost always get the job done for you.
A Quick Solar Panels Installation Guide:
1. Figure out what kind of panels you need. This is going to depend on how much energy you need to produce. Different panels come in a range of voltage and wattage so you can pick what you need.
2. Figure out the angle at which your panels should lie to be most efficient. This is based on meteorological information about your specific location and the way the sun will hit the panels.
3. Prepare the location. When you decide where you’re going to place your solar panels, build a platform for them complete with conduit from your home or business. Use concrete pillars and wood for the platform itself.
4. Mount the panels to the platform. You can use angle brackets at the points where you want your panels mounted, but be sure to center the panels’ front feet before securing them into place.
5. Secure the back legs. Use the information garnished from step No. 2 to help you angle the panels and secure the back legs appropriately.
6. Secure the solar modules. Strip the modules and pair them up to wire them in couples that should end up connected altogether at a central fuse box. Be sure to be careful when working with electricity!
7. Connect the exterior and the interior wiring. Use a solar breaker and a circuit breaker connection for this step.
8. Use the conduit to connect cables from the solar panels to the controls in the house. Connect them to nylon rope so they will be easier to thread through the conduit.
9. Use a grounding rod. Tap it into the ground, leaving about five to six inches free, and run copper wire between this rod and the fuse box.
10. Make the proper electrical connections inside. Be sure to be safe with this!
When In Doubt, Seek Help
Although it is possible to install solar panels yourself, it can be dangerous and tedious. We can help you find trustworthy professionals to do it for you and avoid any risks. TalkLocal connects you to the local roofers you need when a do-it-yourself project turns out to be a bit more difficult than you thought, so you TalkLocal today!
