Wondering how to replace motorcycle brake pads? This article is here to help you answer that question! Below are the proper steps to replacing the brake pads on a motorcycle.
Where Do I Begin?
1. To begin replacing your brake pads, locate the mounting bolts near the calipers and the forks.
2. Unscrew these mounting bolts.
3. Your goal is to remove the calipers from the forks. If you have retaining pins, take those out as well.
What Do I Do Now?
1. When the retaining pins are removed, you will be able to access more of your bike now. Now that your brake pads are loose, inspect them. Check out the condition of your brake pads and the surrounding area. Check for cracks, holes, or tears. Evaluate whether or not it is time to replace your brake pads. If it is time to get new pads, keep reading.
2. Clean out the dirt and debris that has built up around your retaining pins. Also, use brake cleaner to clean the area close to the caliper pistons.
3. After the area is clean, use a screwdriver and push the pistons back to their original position within the bores. As you do this, make sure the brake fluid is not overflowing in the master cylinder.
4. Install in the new brake pads. Helpful tip – as you install the new pads, try not to get grease or oil on the surface of the pads.
5. Replace the pins, clips, and bolts all to their original positions. In addition, check out the fluid level of the master cylinder again. Check out this helpful article about replacing motorcycle pads.
Now you are all set to start riding again! Go slow at first and check out your new brakes.
Get Professional Help
Still need help? Try connecting with a professional auto repair technician who will know how to replace motorcycle brake pads. Check out TalkLocal! We will connect you directly to local, high-quality professionals who can help you out whenever is most convenient for your schedule. It’s free, and it only takes a few minutes!
