Many of us have been there before. Whether it was through any fault of our own, something strikes a window and breaks it. You are left wondering: How do I fix a broken window?
While professional help (at a cost, of course) certainly does not hurt, there are ways you can repair a broken window. Below is one general process that might be the answer to your predicament. Use this step-by-step process to repair a single pane of glass in a window.
How To Fix A Broken Window
1. Remove the window with the broken glass. Lay it on a flat surface so it’s easier to work with. Using gloves, a towel, or rag, remove the broken pieces of glass and dispose of them carefully.
2. Remove any compound that was once surrounding the pane of glass. This might require a blade or other tool. Glazing points are likely installed where they were once holding the glass in. Remove the glazing points.
3. Measure the frame where the glass will be installed. Record these measurements and bring them to a home improvement store to cut glass in the right dimensions. You will want to instruct the person cutting the glass to subtract about an eighth of an inch off the dimensions of the frame so that the glass is smaller.
4. Put caulk on the edges of the frame so it provides a seal when the glass is installed.
5. Lay the glass pane in the frame. Use glazing points to secure the glass in frame. Use at least two glazing points. The larger the glass, the more points you will want to use.
6. Use a glazing compound to secure the glass in the frame. Use a blade to cut the compound evenly or remove any that might be left over.
7. Install the window back in its place.
Still Wondering How Do I Fix A Broken Window?
This method does not work on every window. If you discover a broken window in your home and need help, contact a window replacement specialist through TalkLocal. We scour your local area to find qualified help. We take care of all the searching for you while you can sit back and wait for results.
