Oil furnaces are complicated heating systems. Nowadays, they are known under the name of pressure burners because they have a combustion chamber where oil is sprayed. Unless you choose to make their maintenance one of your priorities, you can’t enjoy them up to 20 years without any problems. Sometimes repair work may be necessary.
There are several repairs that you can perform yourself, and others that require at least the advice of a professional.
4 Oil Furnace Repair Works You Can Perform Yourself:
> Adjusting or replacing the motor belts
> Cleaning or replacing the filters
> Checking the blower
> Leveling and checking the thermostat
1. First, turn the furnace off.
2. Take the fuse out and check it using a multimeter. If need be, change it.
3. A belt may break during the service, so you will have to replace it. But it may happen that the belt is not broken or worn out, but just needs realigning.
4. Take out the motor and open the access door to the blower, take the filter out and use a vacuum cleaner to get rid of the dust. If necessary, replace the filter with a new one, observing the manufacturer’s recommendations.
5. The blower is also very important, due to the fact that it causes the heat to circulate in the house. If the blower works incessantly, the limit switch needs to be adjusted.
6. Level your thermostat. It controls the activity of the blower.
7. A heating monitor that has been broken may cause problems. All you have to do is put a jumper across the thermostat and then turn the furnace on.
4 Oil Furnace Repair Works You Need Professionals For:
> Air tubes
> Air nozzles
> Pumps
> Transformers
Additional Help
If you want an expert to deal with these problems or you just need a piece of advice, TalkLocal can help you address these issues by connecting you with the right professional in just minutes!
