Radiant panels can be mounted on a wall or a ceiling. This type of radiant heater is typically made of aluminium and is heated either by electricity or hot water carried through a pipe network. However, the latter option can pose some risk of water leaking in the wall or ceiling, so most residential radiant heating panels are based on electrical systems.
Cost of Electric Radiant Panels
Just like other types of radiant heaters that use electricity, electric radiant panels can be expensive to use because of the current, high electricity rates. Therefore, these heaters are ideally used as a supplementary source of heat in some rooms. They can also be used in a home extension when it’s not practical to use the main heating system.
Response Time
Out of all types of radiant heaters and other heating systems, radiant heating panels offer the fastest response time, because each panel can be controlled separately. This results in cost savings and reduced energy use compared with other heating systems.
When you enter a room with a radiant heating panel, you can easily increase the panel’s temperature setting so you can be comfortable in just a few minutes. If your radiant panels are heated by water, keep in mind that you need to set a minimum temperature on the heater’s thermostat to prevent frozen pipes.
Installation Tips
Knowing how these types of radiant heaters work will guide you on where best to position them in a room to provide the most comfort.
Radiant panels primarily supply warmth to objects within direct line of sight, which means occupants closer to the panel will feel warmer. This is why some people prefer to use wall-mounted radiant panels instead of the ones mounted on the ceiling, because the panels tend to heat the top space of a room more than the bottom part, essentially heating the top of the head and shoulders more than the rest of the body.
However, if you do choose to install ceiling-mounted radiant panels, installation is not too complicated, especially if you don’t mind the panel being visible. Just screw the panel in place through the ceiling with studs and then make a hole for the plug and cord. In a small room, screw the panel to the ceiling and simply run the electrical cord down a wall to the outlet.
Want Electric Radiant Heating Panels for Your Home?
If you don’t have the time to install the panel on your own or you want to ensure proper installation, hire a heating professional. TalkLocal can connect you with three qualified heating professionals. Get expert help now!
