A large number of car owners like to have their windows tinted. While some do it to control the interior temperature of the car, others do it for privacy reasons. The most important factor, however, is the interior temperature. The hot rays of the sun tend to increase the temperature inside a car by several degrees. This results in extreme discomfort. As a result, most people end up turning on their air conditioning more often, draining a large part of the car’s power. Using a high-quality ceramic window tint is the best way to control the heating up of a car, run the air conditioner less often, and hence, save the car’s energy and keep it cool at all times.

There are many different varieties of car window tints, including metallic, non-metallic, and ceramic. While the metallic tints have a dark appearance and minimize visibility inside a car, a ceramic window tint just ensures a good deal of heat resistance without affecting the visibility. This makes it a much safer car for children and pets. You too can opt for a ceramic window tint if you are looking for heat reduction without the darkness.

What is Ceramic Window Tint?

Ceramic window tint is non-metallic and instead uses a double layer nano-ceramic technology to block a large part of the sun’s heat, saving your car’s interior from heating up to harmful levels. They can ward off 99% of ultraviolet radiation and also keep infrared radiation out. This facilitates in quicker cooling of the car’s interior, making it much safer and less prone to breakdowns or other problems caused by overheating. Of course, it keeps you cooler and more comfortable at the same time, without affecting visibility.

Cost of Ceramic Window Tint

In general, ceramic window tints happen to be almost 15% more expensive than standard metallic tints. However, considering the amount of energy savings and comfort they provide, they are absolutely worth your money.

Installing Ceramic Window Tint Professionally

If you are looking for someone who can help you choose the right ceramic window tint, let TalkLocal help you find a reliable and experienced professional who can effectively perform the installation of your window tint.

We have all had it happen – you’re driving peacefully along and a spring shower bursts from the clouds, inundating your car with a blinding sheet of rain. You turn on your windshield wipers and all you can see are white, smearing streaks, blurring and hampering your vision further. So you peer left and right through the few clean spots, hoping to make it safely home. This is a dangerous situation, not to mention a frustrating one, and most of us don’t even realize that our windshield wipers leave streaks until we are caught in a torrential downpour. Get the highest rated windshield cleaning supplies and products from Amazon and have them shipped overnight starting at $3.44.

How Does This Happen?

There are a number of common causes that lead windshield wipers to leave streaks, but the vast majority of them are easily fixable. The main reason that windshield wipers function ineffectively is that they are worn and dirty. Windshield wiper blades are made of rubber, and this material can easily wear and warp when exposed to the hot sun and the elements. When this happens, they cannot connect with the glass of the windshield properly, causing them to leave streaks.

In addition, dirt on the wiper blades and on the windshield can turn into a greasy mess when mixed with rainwater. As your wiper blades try to move through the falling moisture, all they end up doing is spreading the dirt and contaminants across the windshield, making it nearly impossible for you to see.

What to Do?

The best way to stop your windshield wipers from leaving streaks is to keep them well maintained. Because they wear out so quickly, it is essential to replace them once per year. Make sure to pick blades that are recommended for your vehicle brand and model, and don’t hesitate to ask for advice at your local auto parts shop. Also take the time to keep your blades and your windshield clean. You can also find premium windshield and glass cleaners from Amazon and have it shipped overnight starting at $2.99. Use a high-quality windshield cleaner and make sure that your windshield cleaner fluid tank is always full.

Another Possible Cause

The other issue that makes windshield wipers leave streaks is scratches or deformities in the windshield glass. These can be caused by any number of things, including flying gravel from a poorly paved road and debris caught under the wiper blade that scratches against the surface of the glass every time the blade is used. You can purchase polish compounds and scratch remover kits for your windshield from Amazon and have it shipped overnight starting at $10.97. These types of issues do lead to wiper streaks, and the best remedy is to replace the windshield, which once scratched is compromised and prone to breakage.

Need to Replace Your Windshield?

If the issue is with your windshield, you will need to get it repaired. TalkLocal can help connect you with the best auto glass repair professionals in your area. Visit our website today and use our free, online referral service to find the help you need to get your car safely back on the road.

The owner of this website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon properties including, but not limited to, amazon.com, endless.com, myhabit.com, smallparts.com, or amazonwireless.com.

If any of your car’s windows are broken or even cracked, they will likely need to be replaced. Installing a car window is no simple process, but with the right tools and by following the proper steps, it can be done. A car’s window is made of two main components – the glass itself and the regulator inside the car’s door.

Installing A Car Window

1. To install a new window, you must first open the door itself, which can be done by removing the door’s inner trim panel.

2. With the car door open, use the window controls to roll the window all the way down. Remove the weather strip that seals the window and detach the door handle and window crank.

3. Using a flat bladed tool and screwdriver, pry off the handle bezel. If your car also has a window crank, you can try and remove this by wiggling it around with a cloth behind it to try and dislodge it.

4. Unscrew the screws on the door’s trim panel and lift the panel to release it from the retaining clips.

5. Unplug any electrical connections and pull it away from the door. Remove the water shield and any speakers that may be on the door.

6. It is now time to install the window regulator. Start by sliding the regulator through the door then twisting it into place. If the regulator needs the motor to be installed, you can fasten the motor onto the cable housing, put the fastener on, and then tighten the bolts. Secure the regulator on the door.

7. Place the window glass back into the car. Do this positioning the replacement window above the opening and carefully sliding it down.

8. Bolt the window into place, ensuring it is securely in place within the window regulator. With this done, it is time to begin reconstructing the window.

9. Reassemble the door by reconnecting all the various parts that were removed. Reattach these components before putting the water shield back in place.

Find A Mechanic

Clearly, this is no simple process. If you would prefer to have a professional take a look, consider using TalkLocal to find a capable auto-repairman for you. We will connect you with top-quality auto repair companies in your neighborhood within minutes. Just enter in your specific problem, location, and availability, and up to three companies will call YOU directly, saving you the time and stress of finding one yourself.

You probably already know to get a hold of an auto glass repair specialist when your windshield sustains a crack or chip. But what about more minor imperfections? This is where knowing how to remove scratches from a windshield comes in handy.

Your windshield can acquire scratches a number of ways, whether they are from you scraping it with an ice scraper during the winter or from general debris out on the road. These scratches do not need to be professionally repaired. You can erase these yourself if you have the proper tools. You can also take steps to avoid this and maintain your windshield.

There are a number of glass polishing products that can be the answer to how to remove scratches from a windshield. With one of these products in hand, the process is quite simple.

How To Remove Scratches From A Windshield

1. If your polishing substance did not come with a sponge or rag to apply it with, find one to use. You can also get a motorized polishing tool that helps you buff out scratches with minimal effort.

2. Follow the directions on the glass polish. Often, these products need to be mixed with a certain amount of water in order to dilute it.

3. Apply the polish to the scratched area of the windshield. If the scratches are minimal and tough to spot, make sure you take a mental note of their location before you start.

4. Continue to work the solution into the scratches until they disappear. Glass polish might not be able to erase scratches that are especially large or deep. The best you can do in this situation is to try your best to fade the scratch as much as possible.

Once you are done polishing away scratches in your windshield, you can purchase other products that protect the surface of your windshield to ensure that you will not acquire future scratches.

Contact Auto Glass Repair Specialists

Just because you know how to remove scratches from a windshield doesn’t mean you will never need the help of an auto glass repair professional. When you do, find one immediately with TalkLocal. You won’t have to spend time scouring the Internet or phonebook.

Window tint is a multi-purpose tool these days. While window tinting is often seen as a sleek-looking addition to a vehicle, it can also be used on homes, office buildings, and other work spaces. Tinting windows can ensure an added layer of privacy in addition to regulating the amount of sun and light that enters a window.

As far as automobiles go, there are several types of car window tint film available on the market. Window tint film contains polyester — the thicker the polyester, the darker the tint of the window. However, different features have been added to film over the years to produce these different types of car window tint film.

Dyed Film

Dyed film is probably the most common of the different types of car window tint film. A dye is added to the film to absorb heat and reduce visibility. When sunlight hits the window, most of the heat is absorbed by the dye. The heat that gets through, reaches the window but evaporates before entering the vehicle.

Metalized Film

These car window tint films use a very thin layer of metal to both reflect light away while absorbing both heat and radiation. A wide variety of metals (25 different types) can be used in metalized films. The metal is layered incredibly thin.

Hybrid Film

These films combine the best of both dyed and metalized films. They bring together both the absorbing powers of dyed films and the reflecting powers of metalized films. Because most of the sunlight is reflected instead of absorbed, the tint can be a lot lighter than traditional, dyed films.

Ceramic Film

You might not have heard of ceramic window tint films yet, as they are somewhat of a breakthrough innovation in the industry. Ceramic films incorporate ceramic tints that not only tint windows, but also strengthen them.

Where Can I Get My Windows Tinted?

All of these different types of car window tint film are effective, so it boils down to personal preference. When you know what type of tint job you want, visit TalkLocal to find a technician that can help.